>>主页 - 测试标准
TEST STANDARD
 Fabric Testing and Specifications
Characteristic
Test Method
End Use
Specification
Abrasion resistance ASTM D-3884-80(50 to 100 cycles)(300 to 500 cycles) Corduroy 7.0 oz.Natural fiber ASTM photo standards 3.5 face and back
Bursting strength ASTM D-3786 Weak knits or resin treated Minimum 55 psi
Flammability CPSC 16 CFR1610 All Class 1
Seam slippage ASTM D-434 All Skirts, dress, blouses, shirts: 15 lbs. Pants, jeans, jackets:25 lbs.
Tensile strength ASTM D-5034-grab method Blse, skirt, dresses Short, pant, jeans, jackets
To exceed 25 lbs.
Toexceed 50 lbs.
Wonme's 40 lbs.
pile loss for napped fbcs ASTM D-4685 All pile fabrics Astm photo stds at grade 3.5 min.
Tearing strength ASTM D-1424 Blse, skirt, dresses To exceed 1.5 lbs.
    Short, pant, jeans, jackets To exceed 2.5 lbs.
Fabric weight Suter punch All (+/-)3.0% from standard
Carefree smoothness AATCC 143 All 3.5 per plastic replicas
Fabric/Carefree cerase retention AATCC 88C All 3.5 per plastic replicas
Garment/Carefree crease retetion AATCC 143 All 3.5 per plastic replicas
Carefree seam smoothness on graments AATCC 143 All 3.5 per replicas
Formaldehyde content JIS-L-1041 All 75 ppm maximum
Seam breaking strength ASTM 1683-90 All 25 Lbs All, 15 Lbs Silks or linens
Thread count (Wales X courses) ASTM D-3887 All (+/-)5%
*Dimensional stability and AATCC 150
When applicable
 (-3% LxW) not exceed
appearance after laundry one time     (-5% LxW) for woven stretch fabrics.
cycle only no restoration.     No growth allowed and must contain 2% or more
      spandex fiber
*Dimensional stability and
AATCC 158
When applicable
 (-3% LxW) not exceed
appearance after dry cleaning one     (-5% LxW) for woven stretch fabrics.
time only.     No growth allowed and must contain 2% or more
      spandex fiber

 Fabric Testing and Specifications，Continued
 Fabric Testing and Specifications Table (continued)
Characteristic
Test Method
End Use
Specification
Elongation/Growth/Recovery Dupnont PTM 074 All bottom weight/lycra 15-20% min elongation
    Goods (over/150gr/sqyd) 3.6 to 4.4% max growth
      96% recovery
  Dupnot PTM 077 All top weight/lycra Min 25% elongation
    Goods(under/150gr/sqyd) 5.4 to 6.6% max growth
      94% recovery
Stretch/Recovery ASTM -D-3107 All bottom weight stretch 15 to 20% min elongation
    goods 96% recovery
  ASTM-D-3107 All top weight stretch Min 25% elongation
    goods 94% recovery
Abrasion Martindale ASTM 4966 All No ruptures @10,000 cycles-self fabric
Abrasion Flex ASTM 3885 All 1,000 cycles, minimum
Abrasion Flat (Frosting) AATCC 229 All 1,200 cycles Grade 3
Bowing and Skewing ASTM-3882 All Bowing-max.1-inch.
      Skewing-max. 3% of width or 1.5" max.
Water Drop Test AATCC 79 All Stain Repel Goods Initial #6,20xWash #4
Oil Drop Test AATCC 118 All Stain Repel Goods Initial #6,20xWash #4
*Divisions can request multiple wash/dry clean test requirements for novelty fabrics and embellishments for shrinkage and evaluations.
Testing of Dark Colors or Pigments for Crocking
Purpose To determine if dark colors & pigments have acceptable crocking (rubbing)
performance brfore they are sewn into garments.
Scoope TO determine if dark shades, including but not limited to blacks, indigos,browns, reds are accptable before winding up in our garments.
Test Method
Reauirements
Results
AATTC#8
   Dark Shades (Black, Red, Navy) If fabric fails this test, it should be washed
    Dry 4 or better further at the mill. If it is in garment form
    Wet 2.5 or better and requires a wash after treatment, further
    Pigments Dry 3.5 or better rinsing is required to obtain a passing grade
    Wet 2.5 or better and the division needs to be contacted for
    Indigo Dry 3 or better approval if it fails.
    Wet 2 or better  

Fabric Testing and Specifications，Continued
Fabric Testing and Specifications Table (continued)
Test Method
End Use
Specification
Dupnont PTM 074 All bottom weight/lycra 15-20% min elongation
  Goods (over/150gr/sqyd) 3.6 to 4.4% max growth
    96% recovery
Dupnot PTM 077 All top weight/lycra Min 25% elongation
  Goods(under/150gr/sqyd) 5.4 to 6.6% max growth
    94% recovery
ASTM -D-3107 All bottom weight stretch 15 to 20% min elongation
  goods 96% recovery
ASTM-D-3107 All top weight stretch Min 25% elongation
  goods 94% recovery
ASTM 4966 All No ruptures @10,000 cycles-self fabric
ASTM 3885 All 1,000 cycles, minimum
AATCC 229 All 1,200 cycles Grade 3
ASTM-3882 All Bowing-max.1-inch.
    Skewing-max. 3% of width or 1.5" max.
AATCC 79 All Stain Repel Goods Initial #6,20xWash #4
AATCC 118 All Stain Repel Goods Initial #6,20xWash #4
*Divisions can request multiple wash/dry clean test requirements for novelty fabrics and embellishments for shrinkage and evaluations.
Color Testing and Specifications
Test Method
End Use
Specification
AATCC 107 All 4 or better
Color change Staining All 3 or better
AATCC 15 All 4 or better
Color change Staining All 3 or better
AATCC 132 All 4 or better
Color change Staining All 3 or better
AATCC 612 A All 4 or better
Color change Staining All 3 or better
AATCC 172 All 4 or better
AATCC 8 All-(General) Dry: 4 or better
    Wet:3 or better
AATCC 8 Blacks and Dark Indigos Dry: 3 or better
    Wet:1.5 or better
AATCC 8 Pigments/Indigos Dry: 3.5 or better
    Wet:2.5 or better
AATCC 16E (10 fading units) All 4 or better
  but silk 5 units silk  
F.S.Univ.Ind. All whites 5.0 to 6.0 pH level
AATCC 163 All dark shades 4.5 or better
AATCC 35 Treated fabrics Max 1 gram
AATCC 22 Treated fabrics Original 100 rating after
    20X wash 70 rating.
AATCC 118 Treated fabrics Original 5 rating after
    20X wash 4 rating.
Dupont method Treated fabrics Original 6 rating after
    20X wash 4 rating.
Formulated based on All Above test results must
above test results   meet above standards.
AATCC 109 All 3.5 Rating @ 2 cycles
Note: For colorfastness on color block programs, contrasitng stripes, prints or trims refer to section
Testing of Color Block Programs (Knit and Woven)